Are you looking for the best tile cutter for porcelain? Then you need to look into our article for one of them because we are going to review five of the best porcelain cutters in the market. These are such versatile and multi-use tile cutter which you were looking for. And most importantly, they will benefit you for the longest time possible worthing each of your penny you spend on it.
There are myriads of tile cutter available in the market, but choosing the right one with the best qualities can prove tough. People often make mistakes in finding the good-quality one while finding the cheap one possible. But to save a few pence, we suggest not to compromise on the quality. A good quality tile cutter will last you for years and serve you with all the privileges, and you do not need to fix or buy a new one every time.
Therefore, to unload this burden of yours to find the best tile cutter for porcelain, we have done that needed research and picked up the top-notch ones among the plethora. Hence, we have reviewed them in detail so that it becomes easier for you to pick one according to your needs. We can guarantee you that these tile cutters are the most durable, convenient, and versatile than others.
We understand the price can be a problem when choosing a piece of high-quality equipment like a tile cutter. That is why we have tried to keep the budget in control as possible.
Top 5 Best Tile Cutter for Porcelain List
In this article, you will get a lot of information about tile cutters, so you won't remain confused by the end of picking your needed one. All of them are different from each other in some specific features, but surely they are five of the finest quality tile cutters for porcelain.
At the end of this, we will also reveal the most wanted tile cutter for porcelain to you.
1
Skil 3540-02 7-inch Wet Tile Saw, Red
3 used from $90.92
Free shipping
- Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch
- Adjustable rip fence with miter gauge for accurate straight and miter cuts
- Blade cooling water reservoir to keep blade cool while minimizing dust and debris
- Bevel cuts tile from 0 to 45 degrees. Cut material: Stone/Masonry
- Cross cut capacity: 7.75-inch; Diagonal cut capacity: 7.25-inch
For such a precautious job like tile cutting, you need to show importance in its safety and on its working measures. And Skil has that perfect blend of safety and accuracy in its tile saw ready for you. The blade of this tile cutter is seven inches in diameter that cuts through the deepest of 3/8th inch thicker tile, and it can cut from various angles. The flexibility of this blade makes it outstanding among other tile cutters.
Moreover, the blade won't rust or corrode in years as it is coated with diamond powder. The saw material is made with robust masonry that will bear every kind of weight without collapsing. There comes a miter gauge with this piece to measure with accuracy and cut the perfect length with accurate angles.
The design of this saw is done in such a way that you do not need to interfere with your hands in between works. The entire saw is incredibly stable and has an in-built motor. After work, a hot blade is automatically cooled by the blade cooling water reservoir to prevent the blades from over-heated and prevent dust from getting stuck to it while cutting the porcelain.
This tile cutter is suitable for professional jobs to a simple home job, and it comes at a pretty reasonable price with this much versatility.
Pros
Cons
2
Rotorazer Compact Circular Saw Set Diy Projects
- DURABLE AND LIGHT WEIGHT ELECTRIC MINI CIRCULAR SAW: Rotorazer electric saw is both easy and safe to use, with a thumb-controlled power switch, and a safety switch that keeps the blade guard locked until you're ready to cut. Also comes with a durable construction grade carrying case. High performance motors runs at 4200 RPMS and cuts on an angle, vertically, horizontally and even upside down.
- 7 DIFFERENT SAWS IN ONE. Rotorazer is combination of a Jigsaw, Circular Saw, Hand Saw, Band Saw, Tile Cutter, Hacksaw, and Miter saw. With Rotorazer portable table saw everyone cuts like a pro! It's designed with a 480-watt motor inside a construction-grade chasse that's durable, incredibly light and fits easily in the palm of any size hand.
Now, this is a super convenient tile cutter, as you can manage it within your required pressure. It is a pretty low-profiled cutter great for those homeowners looking for tile cutter for home-related jobs. The gun-like design makes it flexible for you to get the accuracy you want while cutting. It is made with durable plastic, and the blades are made to cut multiple types of material.
You name a material such as a tile, metal, PVC, plastic, copper, carpets; it will fluently cut anything. You can use this stylish cutter for your DIY Youtube projects, but not professionally, as this won't be cutting thicker materials.
This cutter has some special features, like the blades, which are highly adjustable. You can cut at any angle or diagonal according to your preference. The in-built motor 400w cuts the highest ½ inch thick material effortlessly, but not more than that. There comes a dust collector which prevents the surroundings from getting dirty.
There comes a blade guard with which to protect the blades when not being used, and a convenient case where you can store the cutter and also carry it while traveling. This item is less than seven pounds, making it easier for you to carry around and cut for a long time without aching your hands. It has seven various types of cutter in one; it is a complete set of a tile cutter that you can invest in. And it will last you for years.
Pros
Cons
3
QEP 10630Q 24-Inch Manual Tile Cutter
- Cuts porcelain and ceramic tile up to 24-Inches and 16-Inches diagonally
- Straight edge adjustable measurement guide aligns tile for accurate cutting
- 7/8-Inch titanium-coated tungsten-carbide cutting wheel for smooth and durable scoring
- Easily cleaned with compressed air or soap and water if needed
If you want a high performing tile cutter in cheap, then QEP has that for you. Though there are a lot of models that this manufacturer has, this 10630Q model is something worth having to cut 24-inches and 17.5-inches porcelain diagonally. It comes with a measuring tool for more accurate and precise cutting with perfect measurements.
The blades provide smooth and effortless operation with it being covered with titanium; with a 7/8 inches tungsten carbide cutting wheel, your porcelain will be cut in lesser time. The blades and cutting wheel can be washed with soap and water or compressed air to keep the dirt and grime away. The coating will prevent them from getting corroded or rusted.
This has a very comfortable rubber grip for you to hold a long time without your palms getting ached. Plus, the rubber grip will prevent slipping of the cutter while you are working. The lengthy construction of this cutter makes it spacious to cut larger porcelain or ceramics. Do not worry, it won't lose its stability, as the construction is done with heavy-duty metal. With this tile cutter, you have full control over the pressure and direction of the blade.
We guess it is much cheaper than a cutter of this sort, and you can invest in one and have benefited from it for more years.
Pros
Cons
4
QEP 10900Q 35-Inch Manual Tile Cutter
- Rip cuts porcelain and ceramic tile up to 35-Inch and 24-Inch diagonally
- Straight edge adjustable measurement guide aligns tile for accurate cutting
- 7/8-Inch titanium-coated tungsten-carbide cutting wheel for smooth and durable scoring.Depth of Cut:1/2 inch Thick Tile
- Easily cleaned with compressed air or soap and water if needed
This is another manual tile cutter by the same manufacturer, QEP. It is quite similar to the previous model but varies in a few features. This 10900Q cuts 35 inches to 24 inches of tile/ porcelain diagonally. With its same titanium-coated tungsten carbide cutting wheel, the cutter cuts so effortlessly without you have to give so much pressure.
It is manual, so you have full control over cutting and apply the needed force wherever you want. The measuring guide of this cutter helps you to get accurate cuts with perfect measurement. QEP constructs all of its tile cutters with durable steel and aluminum at the base. The heavy-duty piece will prevent the tile/ porcelain from sliding and will provide greater stability.
The bicycle grip is coated with comfortable rubber to prevent your palms from aching after a long session of work Plus; it adds more control by reducing sliding the grip from your hands while cutting.
This is a bit higher priced than the previous one because of this cutting power. Tile cutters are judged with their cutting ability on a certain material, the higher it will be, the more pricey it will be. So, if you are a professional looking for the one with this power, then it will be worth spending for you.
Pros
Cons
5
QEP 10600BR 24-Inch Rip and 18-Inch Diagonal Pro Porcelain Tile Cutter
- Cuts porcelain and ceramic floor and wall tile up to 24 in. and cuts tile up to 18 in. diagonally; 1/2 in. thick
- Wide, die-cast aluminum alloy base with heavy-duty rubber pads
- Equipped with a replaceable 7/8 in. Titanium-Coated tungsten carbide cutting wheel
- Large, high-leverage bicycle grip handle making cutting easier and reduces fatigue
- Replace dull cutting wheels with QEP model 21123 (sold separately)
Okay, so this is the last cutter from again the same brand QEP. The reason why we have kept it at the bottom because most customers will get awestruck by its price. But quality and features also matter when a manufacturer sets the price of a product.
The blades provide smooth and effortless operation with it being covered with titanium; with a 7/8 inches tungsten carbide cutting wheel, your porcelain will be cut in lesser time. QEP makes its cutters so that the blades and cutting wheel can be washed with soap and water or compressed air to keep the dirt and grime away. The coating will prevent them from getting corroded or rusted.
Again, with this also, there comes an ergonomic bicycle handle that helps to prevent sliding and palm fatigue. However, this tile cutter is made entirely with durable aluminum, unlike the other two, made of steel. This aluminum makes the cutter super lightweight and easy to carry. However, the upper base is padded with rubber so that it makes a stable place that stably holds the tile or porcelain while they are being cut.
Pros
Cons
Things to Consider Before Buying the Best Tile Cutter for Porcelain
Before you invest a lump sum money into a tile cutter for porcelain, we would like to give you some tips on how to choose the right one, so that your money does not go in vain.
Cutting Thickness
This is essential to consider before you invest in a tile cutter. You need to think first what thickness is your material, whether the cutter can cut through that thickness or not. If you provide unnecessary pressure on the blade of the cutter to cut thicker material than it is intended to cut, your blade might lose its stability, or get bend.
Versatility
Since these are some high-end tile cutters, so check on the versatility they have. Whether the blades are rust-resistant or not, or can the cutter clean the specks of dust by itself, whether there are safety measures. All these things should be in a tile cutter to ease up your job.
Cutting Angles
If you are a professional porcelain cutter, you would want your cutter to have the ability to cut in different angles to create unique shapes and designs. And if you are buying for regular home job tile cuts, then the diagonal ones will be better for you.
Durability
Last but not least is the durability of the cutter. You should know what type of material they are made with and how they work with each material. Steel and aluminum are the most durable form of materials, whereas plastics can be too, but that has to be high-quality plastic.
Frequently Asked Questions of The Best Tile Cutter for Porcelain
Here, we are going to answer a few common questions regarding the best tile cutters for porcelain by other users. We hope this will help you too.
Is a Manual Cutter Better or Electric One?
Homeowners mostly buy manual cutters for their small-pieces of works or simple tile cutting. In that case, an electric cutter will be a total waste of money and electrical power. Even if an electric cutter is the easiest to operate with a lot of flexibilities, but they are a bit higher in price, and required for heavy-duty cuttings, which are manually not possible.
Can These Cutters Be Used to Cut the Type of Material Than Porcelain? And if So, What Are Those?
Not every cutter has that versatility, but the ones we have reviewed. Yes, they can cut any other kind of material, including glass, copper, ceramic, marble, granite, PVC, etc. However, you have to keep in mind that the thickness cutting limitation that each cutter has does not exceed. If that happens, your cutter won't last for a long time.
Conclusion
We hope we were successful in giving you an informative review of all those tile cutters for porcelains. The review contains a tile cutter for every kind of person, whether you are a professional or novice. Now it is time for you to choose the right one according to your preference or budget if that matters.
Even if you haven’t read the entire article, let us introduce you to our best-selling tile cutter to you so that you nitty-gritty idea about it. So, that hero of the story is SKIL 3540-02 7-Inch Wet Tile Saw.
For such a precautious job like tile cutting, you need to show importance in its safety and on its working measures. And Skil has that perfect blend of protection and accuracy in its tile saw ready for you. The blade of this tile cutter is seven inches in diameter that cuts through the deepest of 3/8th inch thicker tile, and it can cut from various angles. The flexibility of this blade makes it outstanding among other tile cutters.
Moreover, the blade won't rust or corrode in years as it is coated with diamond powder. The saw material is made with robust masonry that will bear every kind of weight without collapsing. There comes a miter gauge with this piece to measure with accuracy and cut the perfect length with accurate angles.
The design of this saw is done in such a way that you do not need to interfere with your hands in between works. The entire saw is incredibly stable and has an in-built motor. After work, a hot blade is automatically cooled by the blade cooling water reservoir to prevent the blades from over-heated and prevent dust from getting stuck to it while cutting the porcelain.
This tile cutter is suitable for professional jobs to a simple home job, and it comes at a pretty reasonable price with this much versatility.
So what are you waiting for? Check on your specific considerations and buy any of these top-notch tile cutters for porcelain, we can assure you will get the lasting benefits from them once you purchase!
Let's Check Our Best Pick:
SKIL 3540-02 7-Inch Wet Tile Saw,Red
- Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch
- Adjustable rip fence with miter gauge for accurate straight and miter cuts
- Blade cooling water reservoir to keep blade cool while minimizing dust and debris
- Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch
- Adjustable rip fence with miter gauge for accurate straight and miter cuts
- Blade cooling water reservoir to keep blade cool while minimizing dust and debris
- Bevel cuts tile from 0 to 45 degrees. Cut material: Stone/Masonry
- Cross cut capacity: 7.75-inch; Diagonal cut capacity: 7.25-inch